1. Hands Free Farm
  2. Top FAQ's
  3. HPX-10 Subscription

Menu

    NOTE: This article only relates to the subscription included with your new Wheelman system purchase. Your subscription requires that you manually activate it as shown below.

    The HPX-10 Precision GNSS subscription available as a separate purchase auto-activates when you complete the purchase.

    To Activate the subscription included with your Wheelman steering system purchase, you will need to go to www.handsfreefarm.com and login with the email address and password you chose when you signed up on our site.

    Once you are logged in you will see a very big "Activate HPX-10 Subscription" button.

    mceclip0.png

     

    Click it, you will then enter in your ESN# (8 digit number on a sticker on the bottom of the antenna). Then click the orange "CLICK TO VALIDATE THE ESN" button. This step ensures that you entered your ESN information correctly.

    mceclip1.png

    Next, you will then see your subscription(s) listed. Any subscriptions not already activated will have a checkbox on the left side of the line. Click the checkbox and then click the "ACTIVATE SUBSCRIPTION" button to start the activation. You will then see a green checkmark that is was completed.
    mceclip2.png

     

    To Download your 4 month HPX-10 Subscription to the Whirl App:

    To download the subscription to your Whirl App, connect your mobile device to the internet, open the Whirl App, and the subscription will download automatically. Please allow up to 1 minute for the subscription to download.

    When you connect to the tractor again, the LED on the antenna will start flashing green and the top left of the tractor screen should say HPX-10 instead of WAAS

    mceclip5.png

    NOTE: If using an iOS device, you must first delete the Whirl App, reinstall it, and log in again before the HPX-10 subscription will download. This must be done each time a new HPX-10 subscription is activated.